|
| |
Playland, Inc. Product Specifications
| VERTICAL
POSTS |
HARDWARE |
 |
- 13 gauge galvanized steel (3.5" Adventure Series)
- 11 gauge galvanized steel (5" Expedition Series)
- 45,000 PSI yield strength (ASTM E-8)
- 48,000 PSI tensile strength (ASTM E-8)
- Triple Flo-Coated corrosion resistance (ASTM B-117)
- Contains a minimum of 30% recycled steel and is 95%-98% recyclable
- Manufactured per ASTM 500
- Limited lifetime warranty
|
 |
- Type 304 (18-8) stainless steel
- Conforms to ANSI/ASCE-8-90
- 84 ksi tensile strength
- Security patch to insure screw locks into vertical pipe
- Tamper resistant
- Special tool required for install
- Limited lifetime warranty
|
| PLASTICS |
C-LINE
FITTINGS |
 |
- 1st quality linear low density Polyethylene (LDPE) - ExxonMobil
LL8450
- Rotational molded
- 3/8 inch wall thickness
- 2,550 psi tensile strength (ASTM D638)
- Mold-in graphics
- UV stabilized
- Anti-static inhibitors
- 9 color options
- Limited 15-year warranty
|
 |
- Aluminum alloy (GM70B) manufactured and tested in accordance with
ASTM Standards: ASTM B 179-68, ASTM B 108-68, ASTM E 10-66 and ASTM E
8-66
- Mounts to vertical posts with adhesive gasket and four 1/4 inch by 1
inch TORX self-tapping screws with patch
- Powder coat finish
- Pre-drilled
- Available for panel or pipe applications
- Limited lifetime warranty.
|
| COATINGS
(Powder) |
PLATFORM/DECKS |
 |
- TGIC polyester
- Electrostatic application
- Baked-on at 400 degrees
- 5-7 mills thick
- Lead free
- High gloss
- No peel/No flake finish
- Resistant to salt spray (ASTM B-117)
- Resistant to humidity (ASTM D-2247)
- Direct/Indirect impact 120 in. pounds (ASTM D-2794)
- Good to excellent resistance to most solvents, oils, acids and
alkalis
- 13 color options
|
 |
- 12 gauge HRPO steel
- Perforated surface
- Polyvinyl Chloride (PVC) coating
- 1.25" on center spacing between perforations
- Limited 15-year warranty
|
COATINGS
(PVC - Polyvinyl choloride coating) |
PRE-TREATMENT
WASH PRIMER |
 |
- MISTAFLEX V4612
- 80-100 mills thick
- Shore A, 65-70 durometer min. hardness (ASTM D2240-66T)
- 1,000 psi minimum tensile strength (ASTM D638, ASTM D412)
- Resistant to abrasion (ASTM D4060)
- UV stabilized
- Self-extinguishing
- Shows less dirt
- Used on decks, stairs, ramps and most bridges
- Increased traction
- 5 color options
|
 |
- 4860-420 primer/1000-44 activator
- Polyvinyl-butyral resin based primer
- Used on all mild steel and all weld joints
- Designed to give adhesion along to a wide variety of metal
substrates
- Provides added metal protection against rust
- Imparts extra durability to topcoat (powder coat)
- When reduced properly, it meets the definition of a
"pre-treatment" primer found in many air quality regulations
|
| H-50
EXTRA HEAVY DUTY CHAIN |
SHEET
PLASTICS |
 |
- Hot dipped, galvanized for rust prevention
- 1/4 inch chain links
- Welded link coil
- Limited 3-year warranty
|
 |
- 3/4 inch high density polyethylene sheeting (Densetec 100)
- Tested in accordance with ASTM D1928 Procedure C
- 4,400 psi tensile strength (ASTM D638)
- Textured finish
- UV stabilized
- 9 color options
- Limited 15-year warranty
|
|
